Adding a User for Outgoing FTP Connections

To add a new user for outgoing FTP connections, press the F6 key from the Work with Client FTP Security screen (STRFW > 11 > 5), as shown in Setting Additional Controls for Outgoing IPv6 FTP Connections.

The Add FTP Client User screen appears:

​                             ​ Add FTP Client User​                                                                                                                 ​ Type information, press Enter.                                                ​    ​ User  . . . . . . . . .​ ​           ​         ​ Name, generic*, User Group,      ​                                               ​ F4 for list                      ​  ​ Outgoing​                         ​ 1=Allow ​                                      ​ IP Address     ​ ​ Subnet Mask    ​ ​ 2=Reject​        ​ Text​                       ​  ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​        ​                ​ ​                ​    ​  ​   ​                               ​                                                                        ​      More...​                                                                                   ​ F3=Exit​  ​ F4=Prompt​  ​ F11=Alternate view​  ​ F12=Cancel ​                          ​                                                                                                                                                                  ​

Enter the name of the new user or group in the User field. This can be a specific or generic* name. For a list of possible values, press the F4 key.

The body of the screen is made up of lines that can refer to different IP address ranges. Possible values include:

Outgoing IP Address

The IP address that begins the range.

Subnet mask

The subnet mask for the address range. For a list of possible subnet masks, showing the number of addresses that the range would include, press the F4 key.

1=Allow 2=Reject

How Firewall responds to requests by the user for outgoing FTP connections to this IP range. Possible values include:

• 1: Accept connection requests
• 2: Reject connection requests

Text

A free-form text description of the rule.